Logo WPSApp






version Android
0 / 0

Show QR-code

Application information

Category: Tools

Размер: 8.8 MB

Updated: 05.02.2024

Developer: TheMauSoft

Share on social media


WPSApp is an Android app that checks the security of your network using the WPS protocol. This protocol allows you to connect to a WiFi network using an 8-digit pin number. However, the app aims to identify if the network is vulnerable to unauthorized access.


  • Pin Testing: WPSApp uses predefined pins and known algorithms to try to connect to the network and check its vulnerability.
  • Default Key Calculation: The app also calculates the default key for some routers.
  • WiFi Password Viewing: WPSApp allows you to view WiFi passwords stored on your device.
  • Network Scanning: The app scans the devices connected to your network and provides information about them.
  • WiFi Channel Analysis: WPSApp analyzes the quality of the WiFi channels.


The app is very simple to use. When scanning networks, you will see different symbols indicating the security status of each network:

  • Red Cross: Networks with a red cross are considered "secure" as they have disabled the WPS protocol, and the default password is unknown.
  • Question Mark: Networks with a question mark have enabled the WPS protocol, but the pin is unknown. The app allows you to test the most common pins in this case.
  • Green Tick: Networks with a green tick are most likely vulnerable as they have the WPS protocol enabled, and the connection pin is known. It may also indicate that the router has WPS disabled, but the password is known, allowing connection.

It's important to note that not all networks labeled as vulnerable are actually vulnerable. Some router companies have released firmware updates to fix the vulnerability.


To use the app, you need to be a Root user to see passwords. Additionally, Android 9/10 users may have access to some extra functions. From Android 6 (Marshmallow) onwards, location permissions are required due to changes made by Google.

Known Issues

There are a few known issues with specific devices:

  • Samsung Models: Some Samsung models show encrypted passwords as a series of hexadecimal digits instead of real passwords.
  • LG Models with Android 7 (Nougat): Pin connection does not work on LG models with Android 7 due to a problem with LG's software.


The app developer is not responsible for any misuse of the app. Intrusion into foreign networks is punishable by law. Users are advised to understand how the application works before giving an evaluation.

Contact Information

If you have any proposals, failures, or comments, you can reach out to the developer at [email protected].


The developer would like to acknowledge the following individuals for their contributions: Zhao Chunsheng, Stefan Viehböck, Justin Oberdorf, Kcdtv, Patcher, Coeman76, Craig, Wifi-Libre, Lampiweb, David Jenne, Alessandro Arias, Sinan Soytürk, Ehab HoOoba, drygdryg, Daniel Mota de Aguiar Rodrigues.

WPSApp for downloaded 0 times. WPSApp is distributed freely in the file type apk.

Application WPSApp was checked by VirusTotal antivirus. As a result of the scan, no file infections were detected by all the latest signatures.

Show more

How to install WPSApp

  1. Download APK file apps from
  2. Locate the downloaded file. You can find it in the system tray or in the 'Download' folder using any file manager.
  3. If the file downloaded in .bin extension (WebView bug on Android 11), rename it to .apk using any file manager or try downloading the file with another browser like Chrome.
  4. Start the installation. Click on the downloaded file to start the installation
  5. Allow installation from unknown sources. If you are installing for the first time WPSApp not from Google Play, go to your device's security settings and allow installation from unknown sources.
  6. Bypass Google Play protection. If Google Play protection blocks installation of the file, tap 'More Info' → 'Install anyway' → 'OK' to continue..
  7. Complete the installation: Follow the installer's instructions to complete the installation process.

How to update WPSApp

  1. Download the new version apps from
  2. Locate the downloaded file and click on it to start the installation.
  3. Install over the old version. There is no need to uninstall the previous version.
  4. Avoid signature conflicts. If the previous version was not downloaded from, the message 'Application not installed' may appear. In this case uninstall the old version and install the new one.
  5. Restart annex WPSApp after the update.

Version History

WPSApp 1.6.68
05.02.24 8.7 MB Download
WPSApp 1.6.65
15.11.23 7.2 MB Download
WPSApp 1.6.67
15.11.23 8.5 MB Download
WPSApp 1.6.63
27.02.23 7.2 MB Download
WPSApp 1.6.61
30.01.23 7.1 MB Download

Reviews for WPSApp

Leave anonymous feedback

Feedback will be sent for moderation